Electricity and rain sound very contradictory, rather scary, right? Well, welding is all about electricity; it makes an electric arc to melt the electrode or filler metal, heats the base metals, and join them together. When it comes to welding in the rain, it might seem scary as hell because it’s no good match. Although there are indeed risks involved in welding in the rain, it’s not as scary as it seems.
There are welding methods such as stick welding that you can use for welding in the rain or wet condition. If you have an important welding job to complete on time and it starts to rain, it’s possible to finish the job in proper ways. Stick to the article if you’re wondering if it’s safe to weld in the rain, is it even legal, and how can you stick weld in the rain.
Can you stick weld in the rain?
It’s not a regular way of welding in a wet condition or raining; rather, it could be an obligatory thing. You never know when the weather will start acting like your enemy and start raining while you’re finishing an emergency weld. The stick welding method is the way you should choose if you have to weld in the rain. It doesn’t use any shielding gas to protect the poodle; it uses flux to protect that.
It’s compatible with any rough situation like rust, paint, wet, and other situations where the other methods fall short. If you’re an employee for a welding job, the OSHA doesn’t clearly say it’s illegal for your employer to make you weld in a wet condition. However, as it can be harmful to weld in the rain, your employer must provide you proper protection to keep you safe.
How To Safely Weld In The Rain?
Welding in a wet situation is possible, especially with stick welding. However, that doesn’t mean you’re completely safe unless you’re taking proper protection and welding safely. You must consider the safety precautions before you know how can you stick weld in the rain. Here are the safety tips for welding in the rain or a wet condition to keep you safe and healthy:
Review the situation first
The first thing to consider before you start welding in rain or wet situations is the situation around you. If it’s a thunderstorm and you barely can stand in the wind, don’t think you can weld in that situation either. The worst situation could be a lightning strike; never go for welding if lightning strikes are there. You must not keep welding in such a situation where you don’t have any idea when a lightning strike or a strong wind may blow you up.
Postpone the job
If it’s raining heavily, lightning strikes are common, or the wind is too strong to stand still, consider postponing the job. It’s the best way to avoid accidents regarding electricity, cold, wind, or even keeping the welder steady. Unless it’s a DIY farm job with 110v stick welder for home use, you can bring it inside your home and keep on welding.
Bring the job inside or get a shade
If you must do the job the same day, the best thing to do is bring the job inside or get a shade over the job. If the welding piece is small enough to move around, getting it inside is pretty easy. But, if the piece is too heavy to move around, get a shade for the working area. A waterproof shade should be good enough to protect the machine, the welding place, and you from water.
Preheat the metal
The rain usually makes it harder to weld properly because the piece gets too wet to weld. If the situation is so, the best way to get a good weld is to preheat the place you’re going to weld. It will evaporate the water on the spot and get you a proper place to start welding on.
Use proper attire and gear
Welding in rain or a wet situation isn’t easy, but with the proper precaution and experience, you can do it just fine. Put on the proper safety attire and gear to get yourself an extra layer of protection. Use a pair of rubber gloves under the leather welding gloves and a pair of rubber shoe covers.
Check the ground clamp and lead
The rain will be the most lethal if your machine or any peripherals have any flaw in them. Check the welder’s ground clamp and the lead for any tear or cracks that can conduct electricity. If there are any, replace the part or at least cover it up with electric tape and shut the tear down to prevent the water from getting inside.
Frequently asked questions
Here are the most frequently asked questions about welding in rain or wet conditions that you might find informative:
Is stick welding in the rain illegal?
Is stick welding hard?
Can you touch the stick when stick welding?
Is stick welding stronger than mig?
Ask any experienced welder if it’s okay to stick weld in the rain; they will tell you they’re doing it for the last 20 years without any problem. However, if you’re new to the welding game, it’s better to know the risk factors and learn how to confront them.
Using the right welding method and welding following the safety rules will keep you out of danger. So, how can you stick weld in the rain? The answer is, stick welding is the best option for welding in the rain can get you a privilege of not being restricted at shielding the weld.